http://www.diyplanner.com/node/862 Comments for "Folding Cover Instructions" en http://www.diyplanner.com/node/862 <p><span class="img-left"><img src="/files/hpda3_cover_flat2.gif" alt="Cover_flat"></span> <br><br><br> </p> <li>1/ Review diagram before cutting.</li></p> <p> <li>2/ Decide on whether you wish the optional inside pocket (C) and/or the optional grey strips, (1 &amp; 3) used to protect tabbed cards.</li> </p> <p><br><br><br><br><br></p> <p><span class="img-right"><img src="/files/hpda3_cover_pocket2.gif" alt="With_pocket"></span> <br><br><br><br><br></p> <p> <li>3/ If using the optional pocket decide on your form factor. If half-height, cut off top half and leave the bottom (with the grey tab)(Y). If half-width, make a vertical cut where indicated. (X) Slash pockets can be cut however makes sense.</li> </p> <p> <li>4/ Cut out the rest of the design, leaving all necessary tabs. Keep the discards handy for reference.</li> </p> <p><span class="img-left"><img src="/files/hpda3_cover_main3.gif" alt="Without_pocket"></span></p> <p><br><br><br></p> <p> <li>5/ Fold the inner pocket. (C) Glue or tape the outside edge of the grey tab (3) for a half-height pocket. Fold over the black tab (2) to secure the pocket and trim. Glue or tape.</li> </p> <p> <li>6/ Fold the top edge of the back cover, (B &amp; BB) and --packing your desired number of cards inside-- fold over the top cover. (You can use the fold indicator on the printout. to estimate 25-35 cards.) Trim bottom edge of cover (A) to size of cards.</li> <p><br><br></p> Analog / Digital Tue, 2 May 2006 16:11:53 -0400 diyplanner 862 at http://www.diyplanner.com